Why do I need a Red Dot Sight on A Bow?

Why do I need a Red Dot Sight on A Bow?

Before you write off a red dot as a gadget, here's what's actually happening when you look through one, and whether it makes sense for the way you shoot.

I talk to a lot of hunters and archers, and most of the conversations start the same way. Somebody sees a red dot on a bow and gives it a long look. Then comes the question, usually with a little suspicion behind it: does that thing actually work, or is it just a gun sight somebody bolted onto a riser?

Here's the short version. A red dot is an optic that projects a lit dot onto a lens. It does not project a light onto your target. You look through it, see your target, and the dot looks like it's sitting right on the spot you want to hit. That's the whole idea. What makes it different from pins is where your eye has to focus.

Pins sit a few inches from your face. Your eye can't hold a sharp pin and a sharp deer at the same time, so it bounces back and forth, usually without you even noticing. A red dot is built to appear as if it were on the target, which lets your eye keep the dot and the target clear. For a lot of us, especially once the reading glasses start showing up in the truck, that's the moment it clicks.

Then there's the part that's specific to bows, and it's where the adjustable mount comes in. Your anchor point is the hinge, and as the shot gets longer, you raise the bow to match the arc of the arrow, pivoting around that anchor. On a standard mount, that change can pull the sight out of line with your eye. The ARD mount is built on an arc that follows the same pivot. Turn the knob to your yardage; the sight travels along that arc, and it stays lined up with your eye and your anchor the whole way. That's also why you can leave the peep behind. Your eye, your anchor, and the dot do the job together. No counting pins. No grabbing the 30 when you meant the 20 in the heat of the moment.

I'll be honest about one thing, though. A red dot won't fix your form. If your anchor point wanders, your arrows will too. The dot just makes it easier to see what you're doing. Consistent form is still what puts arrows where you want them.

How will this help you? If your pins have gotten fuzzy over the years, this is the big one. If you hunt first and last light, when the deer are actually moving, an adjustable-brightness dot can be easier to pick up than fiber in deep shadow. If you're tired of a cluttered sight picture, one dot leaves a lot more room to see the animal. And if you've shot a red dot on a gun for years and you're just picking up a bow, it'll feel familiar right away.

The best thing you can do is see the sight picture for yourself. We put together a short video that walks through exactly how it works. Watch it, and if you have questions afterward, reach out. We're always happy to talk it through, even if the answer is that pins are still the right call for you. Call us at 616-283-5024 or email at adjustablereddot@gmail.com 

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.